Aros Syncro 1000 Bedienerhandbuch PDF herunterladen (Seite 11)

1-1

▼ ▼ ▼ ▼

Introduction

The Adaptec

ARO

™

-1130CA RAID

port

™

Card provides power-

ful disk array support in personal workstations with RAID

port

on-board.

This

Installation and Hardware Guide

explains how to install the

ARO-1130CA, create the first array, and then install the supporting

software. The

Adaptec Array1000CA Family Array Management Guide

which is included with the ARO-1130CA, explains how to use the

software to create and manage additional arrays.

System Requirements

The minimum system requirements for the ARO-1130CA are

■

A RAID

port

II on-board system with an available

PCI/RAID

port

II slot

■

A minimum of one SCSI hard disk drive

■

A standard 168-pin, 16-, 32-, or 64-MByte, EDO 3.3v, 60ns or

faster DIMM installed on the card. (See the Adaptec Web Site

http://www.adaptec.com/RAID

for a list of approved DIMMs

and vendors.)

■

Five MBytes of free hard disk space for the ARO-1130CA soft-

ware (five MBytes of free hard disk space on the Windows sys-

tem disk are also required for the temporary files created

during installation of the software)

■

Windows NT

™

Workstation 4.0 or higher

■

A 3.5-inch 1.44-MByte primary (boot) floppy disk drive

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 77 78

Kommentare zu diesen Handbüchern

Keine Kommentare

Aros Syncro 1000 Bedienerhandbuch Seite 11

Kommentare zu diesen Handbüchern